The techno-Engineering Institute is engaged in testing, improving performance and investigating the failure of HVAC systems. Clean rooms, airtight rooms and contaminations in Hospitals
Hospital check
HOSPITALS
Hospital check
.We perform Hospital annual validation, You can rest assure that your hospital functioning safe and comply with the regulations
?what needs to be measured in routine annual check
Particles counting in the air
Microbial concentration in the air and on the surface
Total Air Changes per hour
Fresh Air changes per hour
Static pressure in the room
Air temperature
Relative Humidity in the air
Noise levels dbA
Light (lux)
Magnetic flux
Electromagnetic radiation
Radioactive radiation
Integrity of the room (room tightness )
Air flow visualization
Hepa filter integrity
Air speed
CO2 concentration in the Air
OZONE presents in the Air
Formaldehyde in the Air
Necessary measures to ameliorate your hospital
If you lack the qualified personal to perform the required measures, our team can supervise and help execution of the repairs
After we measure and test your hospital, we can, if it is necessary, give you detailed list of actions you need to take in order to improve performances and precede your units to comply with the regulations
Balancing your HVAC systems
Improving Air cleanliness levels
Mitigate microbial contamination
Improving airtightness
Improving static pressure
Improving temperature and humidity
Improving air quality
Instructions, guidance and training your maintenance crew to maintain high quality performance of your units
Hospital design
When you are planning to build a new hospital, a new section or new departmen in your hospital
We will help you do it successfully
· After discussing and learning from you, about your new project and your desires we shall Prepper detailed specifications for
Architects
HVAC engineers
Electrical engineers
Medical gases engineers
Safety engineers
Energy center
Plumbing and installation
we shall overview the design work, and discuss it with your design engineers until the design and drawings meets the requirements.
We shall conduct supervision and inspection during Execution of a project to make sure the job done correctly.
At the end of the constrictions works we shall conduct full validation test to the project.
About us
Techno engineering institute was established on 1999 By Mr. Dan Lehrmann
Mr. Lehrmann has earned a nationwide reputation in Israel designing and implementing new methods and standards for Clean Rooms. Holding an exclusive patent for Gas-tight 'Ventilation systems' and this together with his many years of experience constructing gas tight buildings, gained him the CTCB Professional Certification
Mr. Lehrmann applied his unique knowledge in the design and operation of Clean-Rooms to hospitals special rooms like operating theatre, IVF laboratories and isolation rooms throughout Israel. in fact he has set new standards in his approach to controlling and maintaining Clean-Air – particularly with regards to the "Tightness Factor" parameter and the linkage between Tightness and air quality
As a result of his experience and many innovations Mr. Lehrmann was invited to represent his work at the prestigious Clean Room Contamination Control Technology' Conference held at the world trade center in Boston. MA. USA
